Patagonia Product Care Instructions

Machine wash Capilene® garments in cool to warm water with a mild, powdered laundry detergent (nontoxic, biodegradable types preferred). Line dry or tumble dry on low heat. (Line drying saves energy and reduces environmental impact). To remove grease, first try washing the garment by hand with a good liquid dishwashing detergent, rather than machine washing it with a powdered laundry detergent. If the grease persists, rub the stain with a cotton ball or cotton cloth dampened with a few drops of denatured or isopropyl alcohol (found in the paint section of most home stores) to break up the grease, then wash as directed by the garment care tag.

For a guide to the product care symbols that you may see on our clothing care tags, click here.

Wash cashmere by hand in cool water. Use mild shampoo or liquid dishwashing detergent with a pH level below 7. If you use powdered laundry detergent that requires warm water to dissolve, let the water cool before adding your garment. Let the garment soak quietly in the basin or gently swish the garment, but don’t agitate, twist or rub it. After soaking, rinse with fresh water until the water runs clear. Gently squeeze excess water from the garment. Air-dry a cashmere garment by laying it flat on a dry towel and stretching it to the correct size and shape before drying. You can remove stains from cashmere by spot-washing with a natural stain remover like vinegar or lemon juice. (Test in an inconspicuous place first).

Wash your organic cotton gear in cool to warm water with mild laundry detergent (non-toxic, biodegradable types preferred) and dry it on the line if possible. You may also use a dryer on a low-heat setting. (Line drying saves energy and reduces environmental impact).

A DWR or durable water repellent finish keeps moisture from saturating the outer fabric of your garment. Our proprietary Deluge® DWR finish lasts substantially longer than standard DWRs, but still requires proper care for optimal performance. If water no longer beads up on your shell, it’s time to put on another coat of DWR finish. We recommend replenishing the DWR once per season, or more often if the garment receives frequent use and washing. Our favorites are Granger's® products, though there are many good products on the market. Whatever you choose, be sure to use a spray-on for 2-layer garments (with a hanging mesh liner) and a wash-in for 3-layer garments (with an interior fabric protecting the barrier).

Durable water repellent (DWR) is a chemical applied to the face of waterproof fabric at the factory to help keep moisture from saturating. But over time, dirt, salt, oil, sunscreen, bug repellent, wax, even chocolate, will reduce its effectiveness, causing the outside of a jacket or pants to absorb water – often called “wetting out.” When this happens, your outerwear may feel cold and wet. And it will not perform like it did when it was new.

How Will I Know?

It’s pretty simple. If water beads up and rolls off your garment, your DWR is in fine shape. If water remains and the fabric turns a darker shade, then you need to reapply DWR. We recommend that you reapply DWR once each season, or more often if the garment receives frequent use and washing. We like Granger's® DWR products, though there are many good DWRs on the market. We suggest you use a wash-in DWR treatment, as opposed to one that sprays on.

Wash your down garment in cold water in a front-loading machine with a gentle detergent. You can find specific detergents made specifically for washing down items. Machine dry on no to low heat (may take a few cycles) with two to three clean tennis balls added to the dryer to restore fluff. DO NOT bleach, iron or use fabric softener. We recommend using Granger's Down Wash.

Given the rumpled nature of the road trips that inspire so much of our gear, Patagonia doesn’t make anything that requires dry cleaning. Our clothes are made to be worn and washed with very little fuss. More importantly, the EPA estimates that 85% of the dry cleaners in America use perchloroethylene, or "perc," to clean garments and textile products. This chemical solvent has significant human and environmental risks. We make clothes that wear and perform beautifully without all that.

Generally we don’t recommend using fabric conditioners or softeners on our products. They can cause seam slippage in clothing with open-weave construction, and can decrease overall durability.

Like most synthetics, our shells, fleece and Capilene® fabrics will melt or burn if exposed to flame or direct heat. They are not flame resistant; do not use them near ANY direct source of heat or flame.

GORE-TEX® fabrics will provide optimal performance if kept clean and free from dirt, sunscreen, oils from skin and perspiration. Machine-wash GORE-TEX® garments in warm water (104º F/40º C) using a mild powdered or liquid detergent, we recommend using Granger's Performance Wash. Make sure to rinse garments well to remove all of the detergent. Don’t use a fabric softener.

Tumble dry on a warm setting. The dryer’s warmth helps renew the fabric’s durable water repellent (DWR) finish, which keeps the outer fabric from becoming saturated in wet conditions.

If water no longer beads up on the garment, it’s time to put on another coat of DWR finish. We recommend replenishing the DWR finish once per season, or more often if the garment receives frequent use and washing. Our favorites are Granger's® products, though there are many good products on the market. Whatever you choose, be sure to use a spray-on for all garments made from GORE-TEX® fabric.
To remove grease from a garment, dampen the stain and rub in dishwashing detergent. Then wash the jacket in warm water with plenty of mild laundry detergent. If the stain persists, sponge it with a safe cleaning fluid (Renuzit® or Carbona®) or mineral spirits, which can be found at most markets or home improvement stores.
To get gum or sap off of a garment, first freeze the sap or gum with some ice, then use a dull butter knife to scrape off as much as you can. Next, soak the garment in a water/white-vinegar solution, and machine wash with warm water and detergent.

It’s important to keep your H2No® garment clean for optimal performance. Wash any H2No® garment in a washing machine in warm water (104º F/40º C) using a mild detergent. Make sure you rinse the garment well to remove all of the detergent. Don’t use a fabric softener.

Tumble dry on a warm setting. The dryer’s warmth helps renew the jacket’s durable water repellent (DWR) finish, which keeps the outer fabric from becoming saturated when you’re in wet conditions.
If water no longer beads up on your garment, it’s time to put on another coat of DWR finish. We recommend replenishing the DWR finish once per season, or more often if the garment receives frequent use and washing. Our favorites are Granger's® products, though there are many good products on the market. Whatever you choose, be sure to use a spray-on for two-layer garments (with a hanging mesh liner) or a wash-in for three-layer garments (with an interior fabric protecting the barrier).

To remove grease from an H2No® jacket, dampen the stain and rub in dishwashing liquid. Then wash the jacket in warm water with plenty of mild powder laundry detergent. If the stain persists, sponge it with a safe cleaning fluid (Renuzit® or Carbona®) or mineral spirits; you can find both at your local grocery store.
To get gum or sap out of a garment, first freeze the sap with some ice, then use a dull butter knife to scrape off as much as you can. Next, soak the garment in a water/white-vinegar solution, and machine wash with warm water and detergent.

Wash any garment made from hemp in cold or warm water with mild laundry detergent (non-toxic, biodegradable types preferred) and dry it on a clothesline if possible. You may also use a dryer on a low heat setting. (Line drying saves energy and reduces environmental impact).

In general, Patagonia garments do not require ironing. However, if you’re trying to make a good impression on “the parents” and you want to sharpen the crease down the front of your pants after an afternoon of bouldering, you should check the iron symbol on the care label of your garment first to make sure it can be safely ironed. If the iron symbol has a line through it – don’t iron. The dots on the label correspond to how much heat you should use – fewer dots mean less heat.

Having trouble deciphering the hieroglyphics on the care tag of your garment? We’ve got you covered. For a guide to the product care symbols that you may see on our clothing care tags, click here.

Wash lambswool garments by hand in cool water with a bit of dishwashing liquid, or Granger's Merino Wash. Let the garment soak in the basin — don’t agitate the water, twist, rub or wring out the garment. Then rinse with fresh water until the water runs clear. Gently squeeze out excess water. Air-dry your lambswool garment by laying it flat on a dry towel and stretching it to the correct size and shape before drying.

You can clean up stains on lambswool by spot-washing with a natural stain remover like white vinegar or lemon juice (test in an inconspicuous place first).

Merino’s odor-resistant properties allow you to wear your garment multiple times between washings (ideal for road trips). That said, when even your dog refuses to share your sleeping bag, machine wash your merino baselayer in cold water and detergent, we recommed Granger's Merino Wash. Tumble dry on low temperature, or dry flat to save energy and reduce environmental impact.

We blend fibers to provide comfort, moisture-wicking, stretch and long-term durability. Fiber blends withstand wear for a long life and resist odor, so you’ll still have friends when you’ve finished your trail run. Machine wash fabric blends in cold water and tumble dry on low temperature (or hang them out the window on the drive between Bishop and Tuolumne).

Wash in cool to warm water with mild laundry detergent (nontoxic, biodegradable types preferred) and line dry or tumble dry on low heat.

Clean your Polartec® Powershield® Pro garment in a front-loading washer with cold water (85º F/30º C) and a mild detergent. Tumble dry on low heat to improve DWR (durable water repellent) finish performance. (Line drying saves energy and reduces environmental impact).

Wash polyester in warm water in a machine set to Permanent Press. Use a mild laundry soap (non-toxic, biodegradable types preferred) and line dry if possible. You may also use a dryer on a low heat setting, just make sure to remove it from the dryer quickly to prevent wrinkling. To remove stains from polyester, try a few drops of dishwashing liquid directly on the stain and rub until the stain starts to lift. Rinse thoroughly with clean water.

Machine wash your polyester mesh fabric in warm water on the “permanent press” setting. Use a mild powdered laundry detergent (non-toxic, biodegradable types preferred) and dry it on a clothesline if possible. To remove stains from polyester mesh fabrics, try a few drops of dishwashing liquid directly on the stain and rub until the stain starts to lift. Rinse thoroughly with clean water.

Machine wash your polyester or polyester blend garments in warm water on the “permanent press” setting. Use a mild powdered laundry detergent (non-toxic, biodegradable types preferred) and line dry, or tumble dry on low heat. (Remove it from the dryer quickly to prevent wrinkling). To remove stains, try a few drops of dishwashing liquid directly on the stain and rub until the stain starts to lift. Rinse thoroughly with clean water.

Wash your polyester/organic cotton blend in cool to warm water with mild laundry detergent (nontoxic, biodegradable types preferred) line dry, or tumble dry on low heat.

Machine wash your Primaloft® garment with a mild detergent on a gentle, cold-water cycle. Tumble dry on low or line dry.

Machine wash polyester in warm water on the ”permanent press” setting. Use a mild laundry detergent (nontoxic, biodegradable types preferred) and dry it on a clothesline if possible. You may also use a dryer on a low heat setting, just make sure to remove it from the dryer quickly to prevent wrinkling.

To remove stains from polyester, try a few drops of dishwashing liquid directly on the stain and rub until the stain starts to lift. Rinse thoroughly with clean water.

Machine wash your recycled nylon garments in cool to warm water with a mild powdered laundry detergent (non-toxic, biodegradable types preferred). Line dry or tumble dry on low heat.

Machine wash your Regulator® Insulation in cool to warm water with a mild laundry detergent (nontoxic, biodegradable types preferred). Dry by hanging on a clothesline or in the dryer on a low heat setting. (Line drying saves energy and reduces environmental impacts).

To remove grease from the polyester fibers of Regulator® Insulation, first try a liquid detergent rather than a powdered one in your washing machine. If the grease persists, rub the stain with a cotton ball or cotton cloth dampened with a few drops of denatured alcohol (found in the paint section of most home stores) to break up the grease, then wash as normal.

Lacking fur, feathers or scales, we humans have to think up clever ways to protect ourselves from the sun. Products with a UPF designation provide built-in sun protection that won’t wear off.

Elements of the sun-protection strategy can range from yarn selection to fabric construction to the use of special finishes (especially for light colors). To launder fabrics with a UPF rating, simply wash in cold water and tumble dry low (or line dry to reduce environmental impact).

Washing instructions are printed on a white tag inside our garments. Following these instructions will help your gear have a long, interesting life. In general, washing your gear in cold or warm water with mild laundry detergent (nontoxic, biodegradable types preferred) and drying it on a clothesline are the best ways to clean Patagonia® products. We generally recommend Granger's products because of their performance and bluesign® approval.

For a guide to the product care symbols that you may see used on our clothing care tags, click here.

Most waterproof/breathable shells on the market are originally treated with a DWR (durable water repellent) finish, which keeps the outer fabric from becoming saturated so that the breathable barrier can do its job. This coating needs to be replenished once a season, or more often if the piece sees a lot of use. If water no longer beads up on your shell, it’s time for another finish. Our favorites are Granger's® products, though there are many good products on the market. Whatever you choose, be sure to use a spray-on for 2-layer garments with a hanging mesh liner and a wash-in for 3-layer garments with an interior fabric protecting the barrier (Use only spray-on products on garments made with GORE-TEX® fabric).